STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| After-sales Service: | Installation Instruction in Drawings or Videos |
| Material: | Container |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Main Structure | Column | Q345B Welded H column |
| Rafter, Beam | Q345B Welded H column | |
| Surface processing options | 1. Epoxy zinc-rich primer + epoxy mica termediate paint (120μm thickness) | |
| 2. Hot dip galvanization | ||
| Sub Structure | Purlin | Q235B, C section steel, galvanization 275g/m2 |
| Angle brace | Q235B, L- steel | |
| Cross bracing | Q235B round bar, L-steel | |
| Tie bar | Q235B, round pipe | |
| Batter brace | Q235B, round bar | |
| Roof System | Roof panel options | 1. Insulated sandwich panel, PU, rock wool, glass fiber, EPS. Both sides are steel sheet. Thickness of roof panel 50mm/75mm/100mm, thickness of steel sheet 0.4mm/0.5mm/0.6mm |
| 2. Steel plate, thickness 0.4mm/0.5mm | ||
| Gutter options | 1. Galvanized steel gutter, thickness 2.0mm/2.5mm, 3.0mm | |
| 2. Painted, Pre-finished steel gutter, thickness 0.4mm/0.5mm/0.6mm | ||
| Down spout | PVC pipe | |
| Steel flashing and cover | Steel sheet for roof ridge cap, gable wall end cover and corner cover | |
| Options | Roof skylight 1.8mm PVC sheet and stainless steel ventilator | |
| Wall System | Wall panel options | 1. Insulated sandwich panel, PU, rock wool, glass fiber, EPS. Two sides is steel sheet. Thickness of wall panel 50mm/75mm/100mm, thickness of steel sheet 0.4mm/0.5mm/0.6mm |
| 2. Steel plate, thickness 0.4mm/0.5mm | ||
| 3. Brick wall (provided by client) | ||
| Door | 1. Roller door for truck, size customized | |
| 2. Sliding door for truck, size customized | ||
| 3. Access door, steel door, glass door etc. | ||
| Window | PVC or Aluminum frame, Fixed, swing, sliding, louver etc, size customized | |
| Steel flashing and cover | Steel sheet end cover and corner cover | |
| Accessories and fasteners | Anchor bolts, chemical bolts, high strength bolts, ordinary bolts, self-tapping screws, rivet etc. |
If you have the design drawing, we could make the budget according to your design.
If you could advise the following parameters so that we could make the design and quotation accordingly.
| 1. Location (where will be built? ) | _____ country, area |
| 2. Size: | _____ mm(L) * _____mm(W) * _____mm(H) |
| 3. Live load on roof | _____ kn/m2, |
| 4. Wind load (max. Wind speed) | _____ kn/m2, or _____km/h, or_____m/s |
| 5. Snow load (max. Snow height) | _____ kn/m2, or _____mm |
| 6. Anti-earthquake | _____ level |
| 7. usage of the building: | |
| 8. Brickwall needed or not | if yes, 1.2m high or 1.5m high |
| 9. Thermal insulation | if yes, EPS, fiberglass wool, rockwool, PU sandwich panels, Corrugated steel sheet with fiber glass wool will be suggested; If not, the Corrugated steel sheet will be ok. The cost of the latter will be much lower than that of the former. |
| 10. Door quantity & size | _____ units, _____(width)mm*_____(height)mm |
| 11. Window quanity & size | _____ units, _____(width)mm*_____(height)mm |
| 12. Crane needed or not | If yes, _____units, max. Lifting weight____tons; Max. Lifting height _____m |
| 13. Others | Skylight belt, ventilator and any other accessories if needed. |
){kind=link}