High Rise Construction Qingdao Prefabricated Steel Structure Apartment

Product Description

 

 

Part Name	Specific information
Steel Framework(Q235B,Q355B)	1. Steel beam 2. Steel column 3. Bracing 4. The welded H shaped steel,the finished H type  steel,hot rolling type steel, round pipe, round steel,square tube,etc.
Wall and Roof	1. Single steel sheet 0.2mm-0.8mm thick 2. Sandwich panel with EPS,PU,glass wool and rock wool(50/75/100/120/150mm)
Door	1. Rolling door 2. Sliding door and flat open the door 3. Steel sheet, aluminum-alloy,plastic steel 4. According to your requirements
Window	1. Sliding window 2. Plastic steel  frame or aluminum frame 3. According to your requirements
Gutter	1. Aluminum-zinc steel sheet 2. Stainless sheet
Ventilation	1. Turbine vent 2. Ridge vent 3. According to your requirements
Other Materials	Self-screwing tapping,bolt,nut ,foundation bolt ,pulling rivet etc.

Steel Structure Detail for Rigid Frame Structure

The rigid frame structures can be classified into various categories, including single-span (represented by Figure a), double-span (depicted by Figure b), multi-span (represented by Figure c), cantilever steel frame (depicted by Figure d), and steel frames with adjacent frames (represented by Figure e). The connection between the columns and roof beams in multi-span rigid frames follows a hinged pattern. Single-slope roofs (illustrated by Figure f) are a common feature in these structures.
 

A multi-span rigid frame consisting of multiple double-slope roofs is viable (as seen in Figure G). The beam-column cross-section can be uniform or vary in size, and the columns can be either hinged or rigidly connected at the base.

About Materials

Section Steel
There are many section steel types, a solid long steel strip with a specific cross-sectional shape and size.

Angle Steel
Angle steel, commonly known as angle iron, is a long strip of steel perpendicular to each other and forms an angle. There are equilateral angle steel and unequal angle steel. The two sides of an equilateral angle are equal in width. Its specifications are expressed in millimeters of side width x side width x side thickness. For example, "∠30×30×3" means equilateral angle steel with a side width of 30 mm and a side thickness of 3 mm.

Round Steel
Round steel refers to a solid steel strip with a circular cross-section. Its specifications are expressed in millimeters of diameter.

Channel Steel
Channel steel is a long strip of steel with a grooved cross-section.

Steel Plate
It is a flat steel material with a large aspect ratio and surface area. According to the thickness, it can be divided into three types: thin plate (thickness<4mm), medium plate (thickness 4-25mm), and thick plate (thickness>25mm)

Steel Pipe
It is a long strip of steel with a hollow section. According to its cross-sectional shape, it can be divided into round pipes, square pipes, hexagonal pipes,s, and various special-shaped cross-section steel pipes. According to different processing technology, it can be divided into two categories: seamless steel pipe and welded pipe.

 
Project Presentation

Company Profile

Provide Information and Give Quotations

1.Location (where will be built? ): which country? which city?
2.Size: Length*width* Eave height _____mm*_____mm*_____mm.
3.Wind load(max. Wind speed)_____kn/m², _____km/h, _____m/s.
4.Snow load(max. Snow height) _____kn/m², _____mm, temperature range?
5.Anti-earthquake _____level.
6.Brickwall needed or not. If yes, 1.2m high or 1.5m high? or other?
7.Thermal insulation. If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; If not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former.
8.Door quantity & size _____units, _____(width)mm*_____(height)mm.
9.Window quanity &size _____units, _____(width)mm*_____(height)mm.
10.Crane needed or not If yes, _____units, max. Lifting weight____tons; Max.Lifting height _____m.



FAQ

1. What kind of company you are?
We are steel structure building Manufacturer located in Qingdao, Shandong, China, We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.

2. Does your company is Manufacturer or Trading company?
We are Professional Manufacturer in this Field, so you will enjoy the best price and competitive price. Our factory covers an area of 11,000 square meters.

3. Whats the quality assurance you provided and how do you control quality ?
Established a procedure to check products at all stages of the manufacturing process - raw materials, in process materials, validated or tested materials, finished goods, etc.

4. Can you offer designing service?
We'd Love to, we have more than 100 design engineers. We could design full solution drawings as per your requirments. They use software: Auto CAD,PKPM, MTS, 3D3S, Tarch, Tekla Structures(Xsteel)V12.0.etc.

5. Do you offer guiding installation on site overseas?
Yes, we provide fully installation service, supervision and training by extra. We will send our professional technical engineer to surpervise installation on site overseas. Besides, We also have our own abroad guiding installation team consisting of more than 30 people. 
They have succeeded in many countries, such as Iraq, Dubai, South Africa, Algerial, Ghana, Gabon, Tajikistan, Burkina Faso, Panama, Australia.