Product Description
Steel structure is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence, multi-layered high building and so on.
| Load: Dead load 0.25, Live load 0.3, Wind load: 0.35, Snow Load: 0.5 |
| NO. |
Item |
Note |
| A: Main steel frame |
| 1 |
Column |
Welded H column, Q345B, two coats of paint |
| 2 |
Beam |
Welded H beam, Q345B, two coats of paint |
| 3 |
Roof purlin |
Z180*80*20*2.5/2.0, Q235B, Galvanized |
| 4 |
Wall purlin |
C180*70*20*2.0, Q235B, Galvanized |
| 5 |
Column bracing |
D20, two coats of paint |
| 6 |
Roof bracing |
D20, two coats of paint |
| 7 |
Tie bar |
D120 * 2.5, two coats of paint |
| 8 |
Verge steel angle |
L50*4, Galvanized |
| 9 |
Angle bracing |
L50*4, Galvanized |
| 10 |
Anti-sag bar |
φ12, Galvanized |
| 11 |
Bracing pipe |
φ32*2.5, Galvanized |
| 12 |
Anchor bolt |
M24 |
| B: Standard parts |
| 1 |
High strength bolt |
M20*75(10.9S) |
| 2 |
Common bolt |
M12*35, M16*50(4.8S) |
| 3 |
Nut |
M12, M24, M20 * Galvanized |
| 4 |
Turn buckle |
M20 |
| C: roof and wall protect system |
| 1 |
roof panel |
0.5mm/100mm/0.4mm rock wool/ glass wool/ PU sandwich panel |
| 2 |
wall panel |
0.5mm/100mm/0.4mm rock wool/ glass wool/ PU sandwich panel |
| 3 |
Ridge tile mat |
match the type of the roof panel |
| 4 |
Self tapping screw |
M5.5*135 |
| 5 |
Ridge tile external |
0.50mm, PPGI |
| 6 |
Ridge tile internal |
0.5mm,blue |
| 7 |
Trims and flashing |
0.50mm, PPGI |
| D: Windows and door |
| 1 |
Door |
Roll-up door, steel door, access door, etc, Customized |
| 2 |
Window |
PVC or Aluminum frame, Fixed, swing, sliding, louver etc, size customized |
| 3 |
Complementary material |
|
If you have the design drawing, we could make the budget according to your design.
If you could advise the following parameters so that we could make the design and quotation accordingly.
| 1. Location (where will be built? ) |
_____ country, area |
| 2. Size: |
_____ mm(L) * _____mm(W) * _____mm(H) |
| 3. Live load on roof |
_____ kn/m2, |
| 4. Wind load (max. Wind speed) |
_____ kn/m2, or _____km/h, or_____m/s |
| 5. Snow load (max. Snow height) |
_____ kn/m2, or _____mm |
| 6. Anti-earthquake |
_____ level |
| 7. usage of the building: |
|
| 8. Brickwall needed or not |
if yes, 1.2m high or 1.5m high |
| 9. Thermal insulation |
if yes, EPS, fiberglass wool, rockwool, PU sandwich panels, Corrugated steel sheet with fiber glass wool will be suggested;
If not, the Corrugated steel sheet will be ok. The cost of the latter will be much lower than that of the former. |
| 10. Door quantity & size |
_____ units, _____(width)mm*_____(height)mm |
| 11. Window quanity & size |
_____ units, _____(width)mm*_____(height)mm |
| 12. Crane needed or not |
If yes, _____units, max. Lifting weight____tons; Max. Lifting height _____m |
| 13. Others |
Skylight belt, ventilator and any other accessories if needed. |
){kind=link}