Advantages of steel structures in construction
1.Bearing capacity of steel structure
The steel structure is exceedingly solid with the combination of beams, braces, and columns. In addition, the steel structure is considered more stable and resistant than the wall structure.
2.Application of flexible steel structure in construction
With the hardness and toughness of steel, the pre-engineered structures have many diverse shapes, suitable for each project location. They are assembled by common methods (screwing) or joined by welds.
3.Optimizing construction time
The steel bars are processed at the factory, so the direct construction time only takes 1/10 of the time compared to typical concrete structures.
4.Steel structure brings high safety to construction
Steel is not only a fireproof material but also a preferred material to consider in construction. The significant reason is to prevent fire because the steel is completely coated with an extra layer of fire retardant outside to improve heat resistance in the event of an accident.
| Main Steel Frame System |
| Main structure |
H section steel Q355, alkyd painting, two primary painting, two finish painting. |
| Roof purlin |
XZ160*60*20*2.5, galvanized |
| Wall purlin |
XZ160*60*20*2.5, galvanized |
| Intensive bolt |
Grade 10.9 |
| Turn buckle bolt |
M20+2, steel Q235, processing |
| Anchor bolt |
M24, steel Q235, processing |
| Ordinary bolt |
Galvanized bolt M20 |
| Ordinary bolt |
Galvanized bolt M12 |
| Brace nut |
Galvanized bolt M12 |
| Bracing System |
| Cross brace |
Φ20 round steel bar Q235, process and painted (alkyd painting) |
| Angle brace |
L50*5 angle steel Q235, process and painted (alkyd painting) |
| Column bracing |
Φ25 round steel bar Q235, process and painted (alkyd painting) |
| Tie bar |
Φ127*3 steel pipe Q235, process and painted (alkyd painting) |
| Batter brace |
Φ32*2.5, Φ12 round steel bar Q235, process and painted (alkyd painting) |
| Wall & Roof System |
| Roof panel |
Corrugated steel plate or sandwich panel (EPS/fiber glass/rock wool/PU) |
| Wall panel |
Corrugated steel plate or sandwich panel (EPS/fiber glass/rock wool/PU) |
| Edge cover |
0.5mm color plate, angle Alu. |
| Fittings & accessories |
Nails, glue etc. |
| Unpowered ventilator |
Diameter Φ600, stainless steel |
| Sky lighting band |
1.2mm FRP, double layer |
| Sliding door |
sandwich panel door |
| Roof drainage system |
| Gutter |
0.5mm color steel plate |
| Rainspout pipes |
Φ110 PVC pipe |
Materials
Projects
Steel structure building Features:
1) Prefabricated and customized design
2) Short finishing time and low cost
3) Convenient to assemble or disassemble, time-saving, and Labor saving
4) Flexible layout, beautiful appearances, and higher space efficiency
5) Large span for great strength with light deadweight
Checking & Packaging
1.Checking:Carefully check the shipping list. making sure no mistake.
2.Packing:
1.A standard container house packed in one flat pack, 4 sets combined into one package. It can be shipped on board just as one 20' shipping container, The package will be protected by plywood boards around and thin film wrapped.
2.Mixed packaging. Roof and chassis will be packed together with bolts; all the wall panels packed together with wooden pallet in the bottom, corrugated board on the surface, and XPS board in the interspace. It will be shipped in 40' container.
Partner
Company Introduction
If you have drawings, welcome to share drawings with us, quotation will be done based your drawings. Our team will design the steel structure workshop warehouse for you.
If you give the following information, we will give you a satisfactory drawing and make a quotation.
| 1 |
Location |
city |
| 2 |
Size(length*width*height) |
m* m* m |
| 3 |
Wind speed (max.) |
km/h |
| 4 |
Snow load (max.) |
|
| 5 |
Anti-earthquake |
level |
| 6 |
Brick wall needed or not?(If yes) |
1.2m high or 1.5m high |
| 7 |
Thermal insulation |
|
| 8 |
Door quantity & size |
units, (width)m* (height)m |
| 9 |
Window quantity & size |
units, (width)m* (height)m |
| 10 |
Crane needed or not ?(If yes) |
units, max lifting weight tons, max. lifting height m |
| 11 |
Mezzanine needed or not ? (If yes) |
layers, (height)m, weight bearing Kg/m2 |
1.What kind of company you are?
DRYC is a company specializing in designing, manufacturing, selling steel structures and undertaking various kinds of steel structure projects.
2.Can you offer designing service?
Yes, we have excellent design team. We could design full solution drawings as per your requirments.
3.What kind of quality assurance do you offer?
Our company has the Grade 2 of Steel structure engineering professional contracting and the Grade 2 of general contracting on construction engineering; and has passed ISO 9001, ISO 45001, and ISO 14001 quality system certification.
4. Do you offer guiding installation on site overseas?
Normally, there will be detailed installation instruction including photos and videos. If necessary, our engineers can supply construction guidance. And we can also dispatch engineers and skilled workers to your site.
If you have any question for building construction materials, you can feel free to contact me.
){kind=link}